DC Power Boards
TMF Series
Features
- Uses single positive power input
- Outputs stabilized negative gate voltage and positive drain voltage to a GaAs FET
- Outputs negative gate voltage to FET before switching on output of positive drain voltage, and controls positive
on/off switch to protect the FET. - Uses a MOSFET regulator to reduce the difference in potential between input and output voltages, curbing loss.
- Drain current: up to 20 A
- Low output ripple voltage: less than 30mVp-p
- Wide operating temperature range: from -30°C to +70°C
Product Specifications
| Model | Input Voltage Range (+V) |
Nominal Regulated Output Voltage & Max. Current | |||
|---|---|---|---|---|---|
| Drain | Gate | ||||
| Volt. (nom.) |
Curr. (max.) |
Volt. (nom.) |
Curr. (max.) |
||
| TMF53HC-F | 12.5～13.5V | +12V | +20A | -5V | 80mA |
| TMF53HB-F | 11.5～13.5V | +11V | +20A | -5V | 80mA |
| TMF53HA-F | 10.5～12.5V | +10V | +20A | -5V | 80mA |
| TMF53H9-F | 10.5～12V | +9V | +20A | -5V | 80mA |
| TMF53LB-F | 11.5～13.5V | +11V | +20A | -5V | 30mA |
| TMF53LA-F | 10.5～12.5V | +10V | +20A | -5V | 30mA |
| TMF53L9-F | 10.5～12V | +9V | +20A | -5V | 30mA |
DC Power Board Selection Guide (PDF format: 230KB)
Block Diagram
TMF Series
Configuration
TMF53**-F
NOTE 1: "-F" suffix added to part number indicates RoHS compliance.
NOTE 2: All TMF06 series have been replaced by the TMF53 series, which have the same basic electrical and dimensional specifications.
